Samsung SP42W4HPX/XEF Service Manual Download

Page: 29 / 94

Alignment and Adjustments

Samsung Electronics

4-15

4-4 Other Adjustments

4-4-1 Screen Adjustment

1. Warm up the TV for at least 30 minutes.

2. Select

the

“DYNAMIC” Video mode.

3. Trun to the Video Mode(No Signal) using a

remote-control.

4. Connect an oscilloscope to RK, GK, BK.

5. Adjust the VR (VR501, VR531, VR561) screen

so that RK, GK, BK pulse is 20Vp-p each.
(Turn the R,G,B VR screen fully
counterclockwise in the area of each flyback
line.)

4-4-2 White Balance Adjustment

1. Select

the

“DYNAMIC” video mode.

2. Input 100% white pattern.

3. In the stand-by mode, press the remote-control

keys in the following sequence:
Displsy

→

Mute

→

Power ON

4. Warm up the TV for at least 30 minutes.

5. Input a 10-step signal.

6. R-cut off, B-cut off, and G-cut off by pressing

the /- keys.

7. Adjust the low light with viewing the dark

side of the screen.

8. Select R-drive, G-drive and B-drive by

pressing the /- keys.

9. Adjust the high light with viewing the light

side of the screen.

10. If necessary, redo adjustments 6~9.

11. Press the Menu key to exit.

4-6-3 Sub-Brightness Adjustment

1. Input a sub-brightness adjustment signal.

(TOSHIBA PATTERN)

2. In the stand-by mode, press the remote-control

keys in the following sequence :
Displsy

→

Mute

→

Power ON

3. Select Sub-Bright by pressing the /-

keys.

4. Adjust so that the 63 step on the right side of

the screen is not seen (Use the /-
keys).

5. Press the Menu key to exit.

4-4-4 High Voltage (30KV) Check

PRECAUTION

1. Input a lion head pattern.

2. Select

“DYNAMIC” video mode.

3. Warm up the TV for at least 10 minutes.

4. Use a digital multimeter.

ADJUSTMENT

1. Connect the (+) terminal of the digital

multimeter to Q471 and the (-) terminal to
Q401 (located on the deflection board).

2. Adjust RR471S (located on the sub board) so

that the digital meter indicates
DC290V

0.1V.

4-4-5 F.S. (Fail Safe) Circuit Check

(GT430,GT431)

Note : The F.S. Circuit check must be performed

after servicing.

1. Turn on the TV.

2. Select

the

“DYNAMIC” video mode.

3. Short F/S Test point (located on the SUB PCB).

Then, both sound and picture disappear.
(Note: Even if the shorted terminals are
removed, both sound and
picture do not appear. This proves the F.S.
circuit is working. )

4. To restore both sound and picture, turn off the

TV and reset it after about 30 seconds.

Summary of Contents for SP42W4HPX/XEF































































































Search results

Summary of Contents for SP42W4HPX/XEF

Reviews:

Related manuals for SP42W4HPX/XEF

Brands by name

Popular brands

Samsung SP42W4HPX/XEF, Service Manual

Search results

Summary of Contents for SP42W4HPX/XEF

Reviews:

Related manuals for SP42W4HPX/XEF

Brands by name

Popular brands