English
_41
●
SETUP SCREEN
Alarm input
You can set the alarm input type, duration and action type of the Network Video Decoder’s
alarm input port.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Alarm input
>.
3.
Select the input device type.
Type
- Normal open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal close : It is normally closed,
but if it is open, an alarm will be
triggered.
4.
Specify the <
Activation time
>.
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
5.
Set the alarm’s output dwell time when an alarm occurs.
Alarm output : Specify the alarm output time in the alarm input setup.
If the alarm out duration is set to <
Always
>, the alarm continues to function until the alarm
acknowledge button is pressed, as expressed in Audio & Video page.
Test : Conducts a test alarm for the connected alarm out device.
6.
When done, click [
Apply (
)
].
