manualshive.com logo in svg

Samsung SP-43H3HT, Owner'S Instructions Manual, Page: 14 / 84

Share
Download
Samsung SP-43H3HT Owner'S Instructions Manual Download Page 14

English - 14

When the television is initially powered on several basic customer
settings proceed automatically and subsequently. The following
settings are available.

1

If the television is in Standby mode, press the 

POWER

(

) button

on the remote control.

Result:

The message  

Start Plug & Play

is displayed. 

2

To start Plug & Play, press the 

ENTER

(

) button.

Result:

The 

Language

menu is displayed.

3

Select the appropriate language by pressing the 

▲

or 

▼

button.

Press the 

ENTER

(

) button to confirm the language.

Result:

The message

Check antenna input.

is displayed.

4

Make sure that the antenna is connected to the TV, then press the

ENTER

(

) button.

Result:

The  

Country

menu is displayed.

5

Select your country by pressing the 

▲

or 

▼

button. Press the

ENTER

(

) button to confirm your choice.

Result:

The  

Search

menu is displayed.

6

To start channel store, press the 

ENTER

(

) button.

Result:

The search will end automatically. Channels are sorted
and stored in the order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the 

Clock

menu is displayed. 

➢

To stop the search before it has finished or return to normal
viewing, press the

MENU

(

) button.

7

Press the 

œ

or 

√

button to move to the 

Hour

or 

Minute

.

Set these by pressing the 

▲

or 

▼

button. 

➢

You can also set the 

Hour

and 

Minute

by pressing the

numeric buttons directly.

8

Press the 

ENTER

(

) button.

9

When the settings are all finished, the message 

Enjoy your

watching.

is displayed, and then the channel which has been

stored will be activated.

Plug & Play Feature

Plug & Play

œ

œ  √

√    

Move

Adjust

Enter

Skip

Hour

Minute

--

--

Enjoy your watching.

Plug & Play

OK

Language

English

ългарски

Hrvatski

Čeština

Nederlands

Français

†

†

Plug & Play

Move

Enter

Skip

Country 

Belgium

Germany

Spain

France

Italy

Netherlands

†

†

Plug & Play

Move

Enter

Skip

Start Plug & Play

Plug & Play

Enter

Exit

OK

Check antenna input.

Plug & Play

Enter

Skip

OK

Plug & Play

Enter

Skip

Start

BP68-00341A (J61A_Euro_ENG)  2004/07/29  11:17 AM  Page 14

Summary of Contents for SP-43H3HT





















































































Reviews:

No comments