W
P
th
If the color appears spread out or “smeared” on the screen, the
convergence probably needs alignment. Be sure to use the remote
control for the convergence adjustments. (The Convergence
Adjustment can not be made by using the control buttons on the
front panel.)
1
Press the
MENU
button.
Result:
The main menu is displayed.
2
Move the joystick up or down until the
Function
is selected.
Result:
The options available in the
Function
group are
displayed.
3
Move the joystick right.
4
Move the joystick up or down until the
Convergence
option is
selected.
5
Move the joystick right.
Result:
The
Convergence
is displayed with the
Red adjust
selected.
6
Move the joystick right again.
Result:
A crosshair pattern will appear on the screen.
7
Adjust convergence by using your remote control.
➢
If a horizontal red line is visible, use
P
and
P
buttons
to move the line so that it is superimposed on the horizontal
center-line (i.e., make a signal horizontal line that is as white
as possible).
➢
If a vertical red line is visible, use
-
and
+
buttons to
move the line so that it is superimposed on the vertical
center-line (i.e., make a signal vertical line that is as white as
possible).
8
For blue adjustment, do the same as the above.
9
After the blue convergence is correctly adjusted, press the
TV
button (
) to return to normal viewing.
➣
Since the center convergence adjustments can not be
done after completing the side convergence adjustments,
do the center convergence adjustments first.
18
ENG
Adjusting Basic Convergence
Time
AV-Link
Plug & Play
Function
Move: Enter:
Language
English
Blue screen
Off
Convergence
POSITION : JOYSTICK BUTTON
ADJUST : P-UP/DOWN, +/- BUTTON
0 : RED/BLUE TOGGLE
EXIT : MENU
<PLEASE USE REMOTE CONTROL>
RED ADJUST
Blue adjust
Red adjust
Convergence
Move: Enter:
Perfect focus
01778A_ENG1 2/20/06 1:19 PM Page 18