Samsung SNR-1162, User Manual

Page: 25 / 110

English _25

SURVEILLANCE MODE
Registering Location
You can register the camera movement, focus and zoom level as preset.
You can register up to 12 presets.
You can register and delete presets in < Confi guration > - < Camera > - < PTZ >.
Set a PTZ protocol-set camera to one channel layout.
The selected channel (camera) is switched to one channel layout
and the PTZ control menus appear.
Click < Preset >.
The preset button is activated and turns to purple.
Select < Registration Confi rmation Box >.
Move the camera using the PAN/TILT controller.
You can also set zoom, focus and iris.
Select a preset number.
The camera setting in Step 4 is saved as the selected preset
number.
Click < Preset > and deselect < Registration Confi rmation Box >.
Preset setup is disabled and it is switched to normal mode. In addition, the confi gured preset is saved.
Confi rming Preset Location
Set a PTZ protocol-set camera to one channel layout.
The selected channel (camera) is switched to one channel layout and the PTZ control menus appear.
Click a desired preset number.
The camera moves according to the confi gured value.
Starting a Preset
You can perform all the confi gured presets in order.
Set a PTZ protocol-set camera to one channel layout.
The selected channel (camera) is switched to one channel layout and the PTZ control menus appear.
Click < P-run >.
The duration button is activated and presets are executed in order.
While a preset is executed, the corresponding preset number is activated.
Click < P-run > again.
The duration button is disabled and preset operation stops.
J

1.
2.
3.
4.
5.
6.
1.
2.
1.
2.
3.
③
⑤
②
④
⑥
⑥
02093A-SNR-1162-ENG.indb 25 02093A-SNR-1162-ENG.indb 25 2008-11-07 오후 2:31:17 2008-11-07 오후 2:31:17