Samsung SNP-1000A User Manual Download Page 103

Page: 103 / 118

Troubleshooting

Problem

Solution

The MOTION
DETECTION function is
not working.

Please check if 'MOTION

DETECTION' mode is turned on.

Please check if the MD LEVEL is too

low.

Please check the setting of the MD

AREA.

When camera cannot
be controlled for Pan/
Tilt/ Zoom

Inspect the cables(power or network)

connected to the device.

Connect to Admin page to check

whether user control is selected.

Colors are not quite
right.

Please check the 'WHITE BAL'

setting.

The screen is
flickering.

Please check if the camera is facing

directly into sunlight or fluorescent
light.

DAYNIGHT(Auto) mode
is not working.

Please check if the AGC menu is set

to the OFF position.

SENS-UP function is
not working.

Please check if the AGC menu is set

to the OFF position.

Please check if the SHUTTER menu

is set to MANUAL mode.

Please check the limit of SENS-UP

AUTO mode.

Audio is not working

Please check the audio is selected

from admin page.

Please check speaker volume from

the viewer.

In case input sound through
microphone at Viewer is not outputted
through Audio Out of camera, please
check whether Audio Out channel is
selected at admin page. Or check
whether microphone is available at
Viewer.

Summary of Contents for SNP-1000A























































































































Search results

Summary of Contents for SNP-1000A

Reviews:

Brands by name

Popular brands

Samsung SNP-1000A, User Manual

Search results

Summary of Contents for SNP-1000A

Reviews:

Brands by name

Popular brands