motion detection
Events of motion detection can be set to trigger event signal output.
1.
From the Setup menu, select the
<
event ( )
> tab.
2.
Click <
event setup
>.
3.
Select <
motion detection
> from
<
event action setup
>.
4.
Set whether or not to <
enable
>.
5.
Set <
Sensitivity
>, <
Size
> and <
area
>.
6.
Set whether to use <
Detection result
overlay
>.
When a motion is detected, its size and
position is marked with a rectangle on
the screen.
`
The opaque area near the bottom cannot be
set for the motion detection area.
7.
Specify the activation time and
activation condition.
`
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”.
(page 61)
8.
When done, click [
apply (
)
].
English
_63
●
Setup
Screen
