Samsung SNF-7010 User Manual Download Page 92

Page: 92 / 130

setup screen

Depending on network condition, the upgrade can take from as little as 3 minutes to a maximum

of 20 minutes.

If you forcibly terminate the upgrade process, upgrade will not be completed properly.

During restarting the system, accessing with web viewer will not be made.

You can download the latest version from the Samsung web site (www.samsungcctv.com).

to back up the current settings
1.

Click [

Backup

The Save As dialog should appear.

Specify the backup path with a proper

file name, and click [

Save

The backup file will be saved to the

specified path in the format of “

.bin

”.

to restore the backup settings
1.

To restore the backup settings, click

[

restore

Select a backup file and click [

open

If you perform the backup or restoration,

the web browser will be closed and the

camera will reboots.

92_

setup screen

Summary of Contents for SNF-7010



































































































































Search results

Summary of Contents for SNF-7010

Reviews:

Related manuals for SNF-7010

Brands by name

Popular brands

Samsung SNF-7010, User Manual

Search results

Summary of Contents for SNF-7010

Reviews:

Related manuals for SNF-7010

Brands by name

Popular brands