Samsung SND-3080P, User Manual

Page: 67 / 108

English _67
●
SETUP SCREEN
To set the motion detection function
Select < Event > - < Motion >.
The Motion Detection setup window
appears.
When done, click [ Apply ].
Your settings will be saved.
M.D. function : If selecting < Enable >,
the motion detection function will be
activated; if selecting <
Disable >, it will
not operate at all.
M.D. confi guration : Confi gure the
motion detection settings.
Motion sensitivity : Select one from
<
High >, < Medium > and < Low >.
Selecting < High > will trigger the motion detection event even with a small motion.
Motion area : Set an area where the motion detection is performed.
Activation time : Set the time to activate a specifi ed operation when a motion is
detected.
Always : Always executes the specifi ed command when a motion is detected.
Only scheduled time : Executes the specifi ed command when a motion is
detected only on a specifi ed weekday, or time.
Action : You can set an action to execute when a motion is detected.
Alarm output : Set the alarm output port to which the motion detection signal is
transferred.
Output duration : Set the period of time to output the motion detection signal to the
specified alarm output port when a motion is detected.
If another motion is detected during the alarm output, the delay time is recalculated
based on the detection time of the recent motion.
Alarm image transfer : If you select < On >, you can transfer JPEG images to a
registered address via FTP or SMTP server or save images into the SD memory card
according to the setting in <
Event > - < Transfer setup >.
1.
2.
y
y
-
-
y
-
-
y
-
-
-