manualshive.com logo in svg

Samsung SNB-6010, User Manual

Share
Download
Samsung SNB-6010 User Manual Download Page 21

English 

_21

●

  

INST

ALLA

TION & CONNECTION

CONNECTING WITH OTHER DEVICE

 

J

 

The CVBS out terminal of the product is provided for easier installation, and is not recommended 
for monitoring purposes.

Ethernet Connection

Connect the Ethernet cable to the local network or to the Internet.

Power Supply

Use the screwdriver to connect each line (+, –) of the power cable to the corresponding 
power port of the camera.

 

J

 

If both PoE and DC12V are applied simultaneously, the product will be supplied with power from 
PoE.

 

-

You can also use a router featuring PoE to supply power to the camera.

 

-

Use PoE that is compliant with the IEEE802.3af protocols.

 

Be careful not to reverse the polarity when you connect the power cable.

 

If you want to connect an external device, you must turn off the external device before proceeding.

Ethernet

Power

Monitor to install

Summary of Contents for SNB-6010





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands