Samsung SN6000 Series User’s Manual
Connecting External Modules 29
Connecting External Modules
SN6000 computers ship from the factory with an external floppy drive
module. For information about the optional CD-ROM and DVD-ROM
drives, see “Using Options” on page 91. These devices are connected
to the computer’s external module port using the external module
cable.
If your operating system is Windows 98 you can
use the SmartBay utility to hot-swap the
external modules. If you do not use Windows
98, make sure that the computer’s power is off
before you remove or install any external
modules.
Only one external module can be used at any one time. Attach one end
of the external module cable to the module and the other to the external
module port on the computer (Figure 14).
Figure 14. Attaching the External Modules to the Computer
