Samsung SMT-W5100 User Manual Download Page 8

Page: 8 / 125

SMT-W5100 User Guide

CAUTION

Installation/Maintenance

Before

[MENU]

[8. Sys

[3. De

double

whethe

should

since a

inform

registe

system w

delete

ere

executing the

Use a soft dry cloth to

Do not install the

Do not separate

tem]

clean the phone. Do not

use any chemical solvents

phone on an

unstable surface

repair or remodel

the phone

-registration],

like wax, benzene, alcohol,

or near the direct

arbitrarily.

check

thinner, mosquito spray,

rays of sunlight.

If a repair is needed,

r this function

be executed

aerosol, lubricant, or

detergent.

It may cause severe

damage to the parts of

please contact wh

the phone was

ll phone

The use of chemicals on the

the phone, and your

purchased or call th

ation

red to the

phone may cause

phone may not work

Service Centre.

fading/discolouring or damage to

properly.

ill be

the parts.

Summary of Contents for SMT-W5100






























































































































Search results

Summary of Contents for SMT-W5100

Reviews:

Samsung SMT-W5100, User Manual, Page: 8 / 125

Search results

Summary of Contents for SMT-W5100

Reviews: