background image

6

2. Specifications

-1 Features

Product Features

• Professional Design

Samsung New OTR with Stainless Steel, it has professional look 

and the design  matches great with other kitchen appliances, so that 

it provides harmonious kitchen interior and finally completes total 

kitchen solution.

• Turbo vent

With 400CFM ventilation power, New OTR can keep the comfortable 

cooking condition by absorbing smoke and odor from cook-top. 

Moreover, it provides the silent condition that is equivalent noise 

level to other OTR with lower ventilation power.
The Strongest power without additional noise!

That’s the benefit you can feel from New OTR!

•  Big Interior capacity for 

convenience

With the 1.8 cu.ft capacity, it offers enough space to cook.
The big capacity combined with 1,100 watts of output achieves 

superior cooking results.

•  Auto Louver   

(SMH7187STG Only)

Motorized Louver is opened automatically only when OTR is working. 
Therefore, you can prevent the contamination and also  clean the 

OTR easily. 
You don’t need to spend much time to clean the dirt in each grille.
With the convenience, it also provides neat appearance.

• Sensor cook

Don’t worry about failure of your cooking!
New OTR’s sensor technology offers the best dish. 
Only thing you need to do is just select the cooking menu, and then 

you will be satisfied with the cooking results by sensor cook.

• VFD display

With more informative VFD display, the OTR helps you use all the 

function it has with ease.

Summary of Contents for SMH7185STG







































Reviews: