If the alarm fails to activate with any of these tests, clean
it and repeat the tests. If cleaning does not restore the
alarm to normal operation, it should be replaced. Check
the date when the alarm should be replaced, which is
given on the sidewall of the alarm.
Testing
To clean your alarm, remove it from the mounting base.
You can clean the interior by using a vacuum cleaner hose
to blow or vacuum through the openings. The outside can
be wiped with a dry cloth. After cleaning, reinstall and test
your alarm as described above.
YOUR ALARM SHOULD BE CLEANED AT LEAST ONCE
A YEAR.
Direct Heat Test:
Direct heat toward the alarm using a
hair dryer. Be sure to hold the heat source about 12 inches
from the alarm to avoid damaging the plastic. The alarm
will reset once it cools down.
Smoke Test:
Hold a match, canned smoke or other
smoldering stick near the alarm with caution and gently
blow smoke through the alarm until it goes off.
Alarm Operation Test:
Push and hold the Test button
on the alarm for a minimum of five seconds. The alarm
will sound, and the red LED blink. The ADT Security
Hub will display an alert for the smoke alarm.
Flashing Red LED
Press And Hold Until Alarm Sounds
Summary of Contents for SmartThings ADT Smoke Alarm
Page 33: ...t e ...