background image

DRAFT 

Internal Use Only

DRAFT 

Internal Use Only

The FCC SAR limit incorporates a substantial margin of 
safety to give additional protection to the public and to 
account for any variations in measurements.

SAR tests are conducted using standard operating 
positions accepted by the FCC with the mobile device 
transmitting at its highest certified power level in all 
tested frequency bands. Although the SAR is 
determined at the highest certified power level, the 
actual SAR level of the mobile device while operating 
can be well below the maximum reported value. This is 
because the mobile device is designed to operate at 
multiple power levels so as to use only the power 
required to reach the network. In general, the closer 
you are to a wireless base station antenna, the lower 
the power output of the mobile device.

Before a new model mobile device is available for sale 
to the public, it must be tested and certified to the FCC 
that it does not exceed the SAR limit established by the 
FCC. Tests for each model mobile device are performed 
in positions and locations (e.g. near the body) as 
required by the FCC.

For typical operations, this mobile device has been 
tested and meets FCC SAR guidelines.

Summary of Contents for SM-T707A

























Reviews: