English-9
Storing Channels Automatically
When the STB is powered on for the first time it will automatically
perform a channel scan operation.
1
If the STB is in Standby mode, press the
STANDBY
( ) button on
the remote control.
Result:
The
UPDATE CHANNEL LIST
dialog is displayed.
The progress bar shows how much of the scan is
complete. The scan will end automatically and the
channels are sorted and stored. The first channel from
the list will be displayed.
2
After the channels have been stored, you may edit (add, move,
renumber or delete) favourite channels (see page 14~15).
➣
In the event that no channels are found, check the aerial
connections or if the antenna have been pointing at a
transmitting station direction.