CHAPTER FOUR
Special Features
4
4
4
.16
Programming the Remote Control for Other Components
1
Press the appropriate button among the Component Selection
buttons to activate another component (STB, TV, VCR, CATV,
DVD).
For example, if you want to program the remote control to
operate your VCR, press the VCR button on the remote control.
2
Press the SET button on the remote control. The LED for the
active component will light for 30 seconds. Use the number
buttons to enter the code by manufacturer.
(See tables on pages 4.16~4.18)
Each code must be three digits long. For example, to enter the
code “6,” press 0, 0, and 6. To enter the code “76,” press 0,
7, and 6.
See the remote control code tables on the following pages to
find the appropriate code for your particular component.
If more than one number is listed, try each one separately until
you find the one that works.
