COLOR DOME CAMERA
User’s Manual
24
COLOR DOME CAMERA
User’s Manual
25
2. Select a desired mode using the Function Setup switch according to the picture display you want.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
- IR MODE : When IR LED is turned on in B/W, the objects can
be clearly identified due to the function that
decreases screen saturation of objects within a
short distance.
· TOP/BOTTOM/LEFT/RIGHT : Adjust the range according to
the location of objects.
- IR LEVEL : Select LOW when objects appears within a short distance or select HIGH when
objects appears within a long distance on the screen.
AUTO : The mode is switched to ’Color‘ in a normal
environment, but switches to ’B/W‘ mode when
ambient illumination is low. To set up the switching
time for AUTO mode, press the Function Setup
switch. You can turn on or off the burst signal on
B/W mode.
- BURST MODE : You can turn on or off the burst signal on
B/W mode.
- DURATION : You can select brightness of illumination about changing the day/night mode.
- DWELL TIME : You can select the duration time about changing the day/night mode.
…
→
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
AUTO SETUP
▶
1.BURST MODE
ON
2.COLOR->B/W
DURATION
FAST
DWELL TIME
3SEC
3.B/W->COLOR
DURATION
FAST
DWELL TIME
10SEC
4.RETURN
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function Setup
switch so that the arrow indicates ‘DAY/NIGHT’ .
DAY/NIGHT
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.SSDR
OFF
5.BACKLIGHT
OFF
6.SSNR3
ON
7.DAY/NIGHT
AUTO
8.SPECIAL
• You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is
‘OFF’.
• When adjusting the noise reduction level in the SSNR mode, remember that the higher the
level set, the more the noise level will be reduced, as will the brightness of the image.
Notes
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR3. Noise is not reduced.
ON : Activates SSNR3 so that noise is reduced.
3. Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can adjust the
noise reduction level.
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function Setup
switch so that the arrow indicates ‘SSNR3’.
SSNR3
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.SSDR
OFF
5.BACKLIGHT
OFF
6.SSNR3
ON
7.DAY/NIGHT
AUTO
* The day/night switching point of the
camera can be adjusted.
Color
➞
B/W
B/W
➞
Color
Fast
2.5 lux
5 lux
Slow
1 lux
10 lux
Operating Your Camera
