manualshive.com logo in svg

Samsung SHR-4160N/P, User Manual

Share
Download
Samsung SHR-4160N/P User Manual Download Page 119

10-12

Note

Note

#

Clicking the speaker icon turns Audio of a channel on or off.

: Audio OFF       

: Audio ON

If you turn Audio of a SHR-4160N/P channel off, Disable will be displayed.

: Audio Disabled

✴

For the channel with Audio turned on now, use the following Audio relate button
to control Audio volume and set up MUTE.

✴

Once TCP/IP is selected, Audio will be turned off.

Note

Note

%

Where Alarm or Motion Detection occurs at a channel of SHR-4160N/P with
Alarm or Motion Detection established, an icon pops up on the screen real-time.

: Motion Detection 

: Alarm Event

Note

Note

^

If you connect and set up PTZ device in SHR-4160N/P, PTZ controllability of the
channel will be displayed.

✴

Select a channel capable of PTZ and use the PTZ related buttons at the bottom to
control PTZ. (Refer to the description of PTZ Related Button.)

Summary of Contents for SHR-4160N/P





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands