Additional functions and
setting method
6
Welcome Function
When a user stands close to the door lock, the keypad is automatically displayed,
and keytag and fingerprint sensor areas also enter authentication standby mode.
Welcome function is enabled by default. By adding an additional welcome function
and a security mode, the alarm goes off following the voice guidance when someone
stands in front of the door lock for more than a minute.
Dual Authentication Function
When configured, the user must consecutively authenticate both password and
fingerprint to open the door. This function is recommended for those who want better
security, such as those living on the first floor or in an apartment house with corridor
access. Dual authentication mode can only be configured (enabled) when more than
one fingerprint has been registered. Dual authentication function is disabled by
default.
Auto Lock Time Setting Function
The user can set the auto lock time. Jammed deadbolts can be prevented by adjusting
the auto lock time as necessary.
Voice Guidence
A voice provides assistance regarding the door lock operation status.
Voice guidance function is enabled by default.
Wi-Fi Configuration Function
When the Wi-Fi module has been equipped on the door lock, the Wi-Fi function is
enabled by default. App-based services cannot be used when this function is disabled.
It is recommended to disable the Wi-Fi function if the mobile app is not being used.
(Can reduce battery consumption)
Volume Settings
The user can configure the volume for system sound, keypad entry
sound, voice guidance, etc. when opening the door.
Open the battery cover on the interior unit to adjust the volume
through the volume control switch. It is configured as [1] by default.
[0] Mute (Alarm excluded) [2] Max. volume
0 - 1 - 2
References
• Recognition distance may vary in an environment exposed to sunlight or intense light.
• When configuring (enabling) the welcome mode in houses with corridors exposed to sunlight or houses with
lighting on permanently, be mindful that the door lock system will automatically sound the alarm when this
function is used.
• What is WPS (Wi-Fi protected setup)? This is a function designed for app users. After completing Wi-Fi
registration and when the wireless router must be changed during use, you can connect to security settings
via Wi-Fi for easy configuration without a complex configuration process. This mode can only be used in an
environment that can support a WPS wireless router. Refer to the wireless router User Manual for WPS
instructions for the wireless router. Wireless router can only be used normally after registering Wi-Fi again
when the wireless router does not support WPS.
To activate Welcome function and Security
mode
To activate Welcome function
(default)
To deactivate Welcome function
- Detection range: close range setting
- Detection range: middle range setting
(default)
- Detection range: long range setting
To activate Randomizer
(default)
To deactivate Randomizer
To activate Dual Authentication
To deactivate Dual Authentication
(default)
Door closing time
(default / 1 sec)
To activate Voice Guidance
(default)
To deactivate Voice Guidance
To activate interior lever single-touch mode
(default)
To activate interior lever multi-touch mode
To deactivate interior lever touch mode
To activate Wi-Fi
(default)
To deactivate Wi-Fi
WPS mode
1
2
4
7
7
7
2
3
5
3
5
1
1
1
1
1
1
1
1
1
2
3
3
1
1
3
3
3
2
4
4
4
1
2
3
9
9
9
1
3
5
Refer to the following table to configure or disable other additional
functions.
Open the wireless module cover on the interior unit and press the
[Register] button.
Press the exterior keypad security button ( ) according to the voice guidance to enter
configuration mode. Select a function to use according to the voice guidance, and press the
Register button on the interior unit to suspend configuration before completion.
※
Door is not locked even if the door has been closed within default time (within 1 minute) in
configuration mode.
How to use
security function
7
Randomizer Function
Enter two random digits and then enter the password for authentication to prevent
password leak.
Away mode Function
Away mode button ( ) is turned on when the door is locked after the
user leaves the house. Press the away mode button ( ) within 3 seconds
to configure (enable) the function. After the function is enabled when
leaving the house, the alarm goes off as the external alarm LED flashes when
the door is opened from the inside. It is recommended to only use this function
when there is no one home.
Anti-Tampering Function
(Door lock operation is suspended for 3 minutes when authentication fails 5 consecutive times.)
The alarm goes off when operated incorrectly from the outside (outdoor) and the door
lock operation is suspended. The door lock triggers a failure alarm and its
operation is suspended for 3 minutes (cannot be used) after failing authentication
5 times consecutively. (Password, fingerprint, keytag, mobile key authentication failure)
Privacy mode Function
This function is configured when all family members have returned home in the
evening, or to protect personal privacy. It can restrict the door from being opened from
the outside. The door lock cannot be opened through any authentication method from
the outside when this function is enabled. Be careful not to configure this function
when a child is present indoors.
※
Only use this function when there is a person at home when configuring (enabling) this function
through the mobile app.
Configure :
Press the [OPEN / CLOSE] button on the interior unit for
3 seconds with the door lock being locked to enable the
function.
Disable :
The function is immediately disabled by pressing the
[OPEN / CLOSE] button on the interior unit shortly or by
turning the manual door lock to [ ].
Initialization
8
4560852580
Intrusion Detection Function
(※ Default function and cannot be disabled)
The door lock triggers the alarm when the door is forcefully opened from the inside /
outside. The door opening sensor detects an intrusion and the alarm goes off for
5 minutes when the door is forcefully opened with the door lock being locked.
High Temperature Alarm Function
(※ Default function and cannot be disabled)
The alarm system is activated with the temperature sensor reacting to an abnormal
increase in indoor temperature (approx. 70°C +-10°C). LED on the [DOUBLE LOCK]
button on the interior unit flashes as the alarm is triggered for 15 seconds. The door
lock is automatically disabled after the alarm is turned off. (The door lock is restored to
normal operational state when the indoor temperature drops to a certain temperature)
Wi-Fi :
It resets the mobile key and
Wi-Fi registration information.
(Master password, user password, fingerprint, and keytag
information are maintained.)
Remote controller :
It resets the registration
information (to be purchased separately)
Door open
5S
Initialize the Linked Information
(Wi-Fi / Remote Controller)
Password is reset to “1234” and all registered
fingerprints, keytags, and app information are
deleted.
Initialize the key information
Door open
5S
TIP
What is reset? It is a function to perform factory reset for all information configured for the door lock.
Password is changed to ‘1234’ after reset. You must change the password afterward.
Caution
Master password
How to replace the battery and
open the door during an emergency
9
Battery Replacement
Replace the batteries immediately if the voice guidance is activated
after the battery replacement alarm (LED) is turned on. Continuing
to use without replacing the batteries on time may result in the
door lock shutting down due to lack of battery power. Replace the
batteries by pushing the interior unit cover upwards to remove the
cover.
• Battery use time may vary depending on the battery manufacturer, manufacturing date,
and environment of use. (8 alkaline batteries (1.5V AA) can be used for 10 months when used
10 times per day ; use time may be less than 10 months when managed by the mobile app.)
• Regularly check the battery state (6 months is recommended) to prevent damage to the
product from battery leak.
• When the battery replacement alarm goes off, some functions such as entering registration
mode or configuration mode may be restricted until the batteries are replaced.
• When the battery replacement alarm goes off, do not use previously used batteries.
Immediately replace all the batteries with new ones.
Caution
Emergency Door Open
When the door lock is continuously used without replacing the batteries,
the door lock may not operate normally due to a lack of battery power.
In this case, emergency power or mechanical override may be used to open the door.
Emergency Power
Purchase 6LF22 alkaline battery (9V) from a convenience store or electrical shop near-
by. Connect the 9V battery to the power input of the exterior unit, wait for 20 seconds
after the beeping sound goes off, and perform authentication (fingerprint / password /
keytag) to open the door by disabling the door lock.
Mechanical Override
Mechanical override can be used to open the door by disabling the door lock when the
door lock no longer operates due to lack of battery power or other circuit errors.
Insert the mechanical override in the mechanical override hole at the bottom of the
exterior unit and turn the key left and right to open the do
or.
• Keep the mechanical override at a safe location outside of the house for unforeseen
circumstances. (Vehicle, office, etc.)
Caution
Lower Exterior Unit
Latch open button
Mechanical override hole
External Power
Contact
