Samsung SHP-3701H, Installation Manual

Page: 2 / 18

2_ SHP-3701H
OVERVIEW
The outdoor-type housing (SHP-3701H) is the housing used to install the smart dome
camera or network camera on a wall or ceiling outdoors.
CAUTIONS ON INSTALLATION
For the power supply of the housing, please use the AC24V (3A) adaptor.
Please select an installation site that can withstand quadruple the weight of the product.
When installing the unit in a place where the temperature is very low, such as a cold storage unit, the
cable piping connected to the housing needs to be sealed by silicone so that no external air gets into
the inner part of the housing.
If high-temperature and high-humidity air from the outside enters the inside of the housing through
the piping, moisture or water may be generated within the unit due to the difference in temperature
between the outer part and inner part of the product.
Please keep people away from the installation site during product installation, as there may be
a risk of falling. Please proceed with the installation after moving valuables to a safe place.
If the product is installed in a place with high humidity, moisture may occur on the dome cover of the housing.
Please open the dome cover prior to installation and remove moisture from the unit with a soft and dry cloth.
OPTIONAL PRODUCTS FOR INSTALLATION
Please install the outdoor housing by using the appropriate one of the following adaptors
according to the installation site.
When installing one of the adaptors listed below, please try to install the unit according to the installation manual.
①
CEILING MOUNT ADAPTOR (SBP-300CM): Please use this unit for installation on a ceiling.
② WALL MOUNT ADAPTOR (SBP-300WM1): Please use this unit for installation on a wall.
1.
2.
3.
4.
5.
ƒ