COLOR CCD CAMERA
User’s Manual
22
COLOR CCD CAMERA
User’s Manual
23
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select
‘
White Bal.
’
by using the Up
and Down buttons so that the arrow indicates
‘
White Bal.
’
.
2. Select a desired mode using the Up and Down buttons.
White Balance (White Bal.)
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
※
Select one of the following 5 modes, as appropriate for your purpose.
ATW :
Select this when the color temperature is between 1,700°K and
11,000°K.
INDOOR :
Select this when the color temperature is between 4,500°K and
8,500°K.
OUTDOOR :
Select this when the color temperature is between 1,700°K and
11,000°K. (sodium light inclusion)
AWC
→
SET :
To find the optimal setting for the current luminance
environment in this mode, set the point the camera towards a
sheet of white paper and press the SET button. If the
environment changes, readjust it.
MANUAL :
Select this to fine-tune White Balance manually. Set White Balance
first by using the ATW or AWC mode. After that switch to MANUAL
mode, fine-tune the White Balance and then press the SET button.
How to Use the Camera
How to Use the Camera
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 0 to 30dB.
- HIGH : Allows automatic gain control from 0 to 42dB.
RETURN :
Select this to save the changes in the EXPOSURE menu and return to the
SETUP menu.
SENS-UP :
When it is night or dark, the camera
automatically detects the light level
and maintains a clear picture if this
mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
• If you press the SET button in ‘AUTO’ mode, You can adjust brightness by increasing or
decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely it is that
an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
zoom level is increased, this is normal.
Notes
