U/S RW : MCC , RITEK
(24X, 32X)
General DMA Installation Guide Windows 98/Me
Important!
Please read the entire DMA installation guide before installing your CD-RW Drive.
About DMA Installation
For stable writing performance at high speeds, Installation of DMA transfer mode for E-IDE/ATAPI
interface is strongly recommended. We recommend DMA mode for fast writing.
DMA Setting
Before you install your CD-RW Drive, we recommend to set DMA to enabled on your PC system. See the
following procedure to set DMA transfer mode in windows oprerating system.
(Windows 98/ME)
+
Click on START
+
Click on Settings
+
Select Control Panel
+
Select the System Icon
+
Select the Device Manager panel
in System Properties
+
Expand the CD-ROM icon
+
Select your CD-RW Drive
+
Click on the Properties button
+
Click on the Settings tab
+
Check the DMA checkbox to enables DMA.
+
Click OK
+
Restart your PC
Windows 2000/XP
Select the DMA mode by selecting
[Start > Setting > Control Panel > System > Device Manager > IDEATA/ATAPI Controller >
Default/Assistant IDE Channel Advanced Information]
Recommended Disc Types
CD-R
MCC, RITEK, CMC, SKC, BEALL, PRODISK, MAXELL, ACER, MPO, FUJI, TAIYO YUDEN, TDK,
GIGA, PLASMON
CD-RW
CD-RW : RICOH , RITEK , MCC , PRODISK , SKC , CMC, ACER
(1X - 4X)
H/S-RW : RICOH , CMC , RITEK , ACER , PRODISK , SKC
(10X)
Connecting the Cables
Troubleshootin
