Samsung SGH-X810, Service Manual, Page: 22 / 84

SAMSUNG Proprietary-Contents may change without notice
Main Electrical Parts List
5- 7
This Docum ent can not be used without Sam sung's authorization
5 - 4 . C e llu la r p h o n e a s s e m b lin g
1
1) Screw on a JO G.
2
1) Put the SPEAKER W IRE through the hole
of KEY BRACKET m arked in red circle.
1) Pull the F-PCB of JOG through the gap of
KEY BRACKET.
1) Check the color of SPEAKER W IRE.
3
1) Rem ove the paper on the back of SLIDE KEY F-PCB.
2) Adhere the SLIDE KEY F-PCB to SLIDE KEY BRACKET from GUIDE PIN m arked in blue
circle.
3) Take care of the GUIDE HOLE of SLIDE KEY F-PCB adhering on the GUIDE PIN of KEY
BRACKET front.
4) Press the m arked part in red circle of SLIDE KEY FPCB with thom b to stick to SPKEAR.
1) Take care of the PORON on SLIDE KEY F-PCB not to be pressed.
4
1) Solder the JO G KEY F-PCB after positioning it on the GUIDE PIN.
2) Solder the SPEAKER W IRE using pinset.
1) Take care of soldering correct.