SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-8
This Document can not be used without Samsung's authorization
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
Use 1.1 ± 0.1 Kgf·Cm
1) Be careful not to make scratch and molding damage.
2) Be careful not to damage LCD F
-
PCB.
1) Be careful not to make scratch and molding damage.
5
1) Assemble FOLDER UPPER with FOLDER LOWER from
the upper end to the lower end.
1) Screw up the FOLDER LOWER at two point.
2) Attach screw rubber caps on the screws
by using a pincette.
6
7
8
1) Insert LCD FPCB(which is connected to
folder)into the bottom of FRONT HINGE.
2) The folder HINGE sould be inserted into
the front's hole.
3) Assemble FOLDER with FRONT.
1)
Attach the dust protection tape on
the inside of the FRONT.