SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-
12
This Document can not be used without Samsung's authorization
1) Check the correct.
1) Check there is no gap between Front and rear case
2) Check the direction of PBA.
3) After insert KEY, check tension.
15
1) Tighten the REAR SCREWS (4 POINT)
1) Place MAIN PBA as below picture with
caring the Bosses and the Holders.
13
1) Insert REAR to FONT ASS'Y.
2) Insert CAMERA KEY, VOLUME KEY at
correct place.
3) Put the Rear cover with pressing.
14
1) Attach RF SHEET.
2) Check the structure.
16