30
Menu functions
Delivery reports: set the network to inform you
when your message has been delivered.
Bearer selection: select the GSM or GPRS
preferred bearer type.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Unicode if
you enter a Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides the Automatic
character encoding by default.
Delete all
(Menu 1.6)
Use this menu to delete all of the text messages in
each message box.
1. Press <Mark> to check the message box(es) to be
cleared.
To cancel, press <Unmark>.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Memory status
(Menu 1.7)
Use this menu to view the total number of messages
you can store and the number of the messages you
have stored on the SIM card, in the phone’s memory,
and in the CB memory.
Voice mail
(Menu 1.8)
Use this menu to store the number of the voice mail
server and access your voice mails.
• Connect to voice server: connect to the voice
server to allow you to listen to your messages. You
can also connect to the voice mail server by
pressing and holding [1] in Idle mode.
• Voice server number: change the voice mail
server name or number.
You must enter the voice server number before you
can access your voice mails. Your service provider
can give the voice server number.
X140.book Page 30 Tuesday, March 8, 2005 5:01 PM