Samsung SGH SGH Z540 Service Manual Download Page 17

Page: 17 / 77

SAMSUNG Proprietary-Contents may change without notice

Exploded view and Part List

3-9

This Document can not be used without Samsung's authorization

1) Connect ANT cover with FRONT
2) Screw down

3) Insert Screw cap at two points

1) Take care so that ANT cover do not interfere with Ant wire.
2) On screwing down, be careful not to scratch

1) On inserting LCD, be careful for foreign substance.

2) Take care that MOTOR wire do not interfere with screw boss.

3) Notice that FPCB should not be cracked on inserting CAMERA.

1) Insert LCD and SPK ASS'Y bracket.
2) Twist twice MOTOR wire and insert MOTOR.

3) insert LCD FPCB into F/LOWER hole.

4) Insert VGA CAMERA.

5) Attach a semocircular Poron sponge on the MOTOR with a

pinset.

① LCD insert

② Bracket insert

⑤ CAMERA

insert

④ F

PCB insert

③ MOTOR insert

Summary of Contents for SGH SGH Z540














































































Search results

Summary of Contents for SGH SGH Z540

Reviews:

Related manuals for SGH SGH Z540

Brands by name

Popular brands

Samsung SGH SGH Z540, Service Manual

Search results

Summary of Contents for SGH SGH Z540

Reviews:

Related manuals for SGH SGH Z540

Brands by name

Popular brands