SAMSUNG Proprietary-Contents may change without notice
Main Electrical Parts List
5-4
This Document can not be used without Samsung's authorization
5-3. Disassembly
1
3
2
4
1) Insert tweezer into the upper side of Intenna like a
picture, then detach PBA Ass’y from Front Ass’y with
care.
2) Detach a tape of connectors.
※
caution
1) Please be careful when you detach PBA
Ass’y, because there
is Double-stick on the below.
1) After take 3 FPCBs out connector, detach
PBA Ass’y from Front Ass’y.
※
caution
1) Be careful with the damages of connectors.
1) Unscrew 4points rear bolts the back of a
set.
2) First take the left side hook apart, next rig
ht side and then remove the whole Rear
like upper picture.
※
caution
1) When you take a Rear apart, be careful a
out the damage of the
hook.
1) Detach a EMI tape of IF connector and divide
camera FPCB from the
connector.
2) Detach a camera key FPCB, a volume key FPCB,
and a motor stick to the Front then unscrew a and b.
※
caution
1) Be careful,
the motor wire isn’t down.
2)
Be careful with the damages of FPCBS.
1.4*5
The location of
the hook
Bolt A:1.4*3
Bolt B:1.4*4
Isolation Tape
3 connectors