50
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the
Volume
keys on the left side of the phone.
Press the
Up
volume key to increase the volume level
and press the
Down
volume key to decrease the volume
level.
– or –
Quickly add more volume to the incoming audio by
tapping the on-screen Extra volume button
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
•
Hold
: place the current active call on hold.
•
Add call
: displays the dialer so you can call another person.
•
Keypad
: displays the on-screen keypad, where you can enter
number using DTMF (Dual Tone Multi-Frequency).
•
End call
: terminates the call.
•
Speaker
: routes the phone’s audio through either the speaker or
through the earpiece.
–
Tap
Speaker
to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
will appear under the Speaker button.
–
Tap
Speaker
again
to use the phone’s earpiece (see
Speakerphone During an Active Call”
on page 53). The
green line will disappear when Speaker is not activated.
•
Mute/Unmute
turn the onboard microphone either on or off.
–
Tap
Mute
during a call to mute the microphone. A green line will
appear under the Mute button.
–
Tap
Mute
again to unmute the microphone. The green line will
disappear when Mute is not activated.
•
Headset
connects to a Bluetooth headset.
–
Tap
Headset
during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
–
Tap
Headset
again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.
•
Press
for more options:
–
Contacts
: allows you to go to your Contact list.
–
Memo
: allows you to write a memo.
–
Message
: allows you to write a message during a call.
Summary of Contents for SGH-M919V
Page 12: ...vi ...