SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-5
This Document can not be used without Samsung's authorization
1) The wire of motor and speaker have to maintain the
twisted state.
2) If the wire is dispersed, twist the wires to the
right side. At this time, put the motor wire upside
thespeaker wire.
1) Be careful about the damage of wire
1
6
4
3
2
5
1) Be careful that the key connector is placed down
the pba.
2) WIRE must be at the fixed location.
1) Assemble the PBA from right side( arrow mark ) to
the front.
2) Put the Wire like figure.
1) Recheck connection part not to get loose.
1) Arrage the WIRE like the figure.
1) The connector with blue wire connect to VIB position.
2) The connector with yellow wire connect to SPK position.
1) when assemble PBA, push the hook and four screw boss
holes and recheck PBA assembling with accuracy.
2) Attach the motor, speaker, key connector.
1) Then, put the projection of key upside side switch
1) Adhere the side keys like figure.
1) Assemble the REAR with the marked hook.
2) Assemble with accuracy, and screw.
―
Assembly