E
nte
r text
23
Refer to the following table:
Entering strokes and characters in
Stroke modes
1. Press the keys that correspond to a
character’s component strokes. Press keys
in the order that you would write the
strokes, using one press per stroke.
Example: To enter
, press [5] to enter
and then [3] to enter .
2. Press [Up] or [Down] to scroll through the
choices.
3. To select a character and add it to your
message, press the corresponding key, [7]
to
[ ].
Other Stroke mode operations
• Press [ ] to insert a space.
• Press [Left] or [Right] to move the cursor.
• Press [C] to clear letters one by one. Press
and hold [C] to clear the entire display.
Category Key Strokes in each category
If you are uncertain of the stroke order,
press [6] in place of each questionable
stroke. Continue entering strokes until the
character displays or until you finish the
character.
C408.book Page 23 Wednesday, October 18, 2006 6:56 PM
Summary of Contents for SGH-C408
Page 1: ...SGH X700 Users Guide ...