Call Functions 23
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the
Volume
keys on the left side of the phone.
Press
to increase the volume level and press
to decrease
the volume level.
In Idle mode, you can also adjust the ringer volume using these
same keys.
Putting a Call on Hold
You can place the current call on hold whenever you want. You
can also make another call while you have a call in progress if
your network supports this service.
To put a call on hold:
1.
While on a call, press
Options
soft key, then select
Hold
.
This action places the current caller on hold (which is
displayed onscreen as a greyed-out box).
2.
You can later reactivate this call whenever you want by
pressing the
Resume
soft key.
To make a new call while you have a call in progress:
1.
While on a call, press the
Options
soft key, then select
Hold
.
2.
Enter the new phone number you wish to dial or look it up
in the Address Book.
3.
Press
to dial the second number.
- or -
4.
Press the
Options
soft key, then select
New Call
. Once
connected, both calls are displayed on the screen.
Note:
The caller currently on hold appears greyed-out onscreen.
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
To switch between the two calls:
1.
Press
Options
soft key, then select
Swap
.
•
The current call (caller #2) is placed on hold and the previous call
on hold (caller #1) is then reactivated so that you can continue
conversing with that person.
2.
Press
to end the currently active call.
To end a specific call: