manualshive.com logo in svg

Samsung SF-560 Series, User Manual

Share
Download
Samsung SF-560 Series User Manual Download Page 172

M

AINTENANCE

8.9

8

Replacing the Toner Cartridge

When the toner eventually runs out, only blank pages print when a print 

job is sent or when a fax is received. At this stage, the toner cartridge 

needs to be replaced. The display on the control panel shows the 

warning message, “Toner Empty” and the machine stops printing.

N

OTE

: You can set the machine to ignore the “Toner Empty” 

message and continue printing. See page 8.11. 

1

Open the front cover.

2

Lightly pushing the used cartridge down, pull it out.

3

Unpack the new toner cartridge and gently roll it 
horizontally four or five times to distribute the toner evenly 

inside the cartridge.
Save the box and the Plastic bag for shipping.

4

Slide the new toner cartridge in until it locks into place.

5

Close the front cover.

Summary of Contents for SF-560 Series



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands