Samsung SF-4300C Service Manual Download | Manualshive

Page: 55 / 93

background image

Samsung Electronics

5-27

5-1-8 OTHERS

OPERATOR PANEL DESCRIPTION

KEY & LED

DESCRIPTION

- When power cord is inserted, the system is turned on and initialized. It does not operate but

waits for Ready key to be pressed.

- If you press the Ready key, the nearby Ready LED will be turned on and the device will be

initialized with the system in standby mode.

- If the Ready LED is off, the system does not operate though it is on.
- Running Print Out Test Pattern

Step 1

. While Ready LED is off, press ÔReadyÕ key for 0.5 - 1 second with ÔFF/Stop key pressed

in advance.

Step 2

. Pattern is printed so that you can check the nozzles of the head.

- This key is used to exchange print head cartridge in the toggle mode or to insert it for the first

time.

- If color head is mounted when fax documents are to be printed,it does not print but Ready

LED and operating LED blink.

- Press this key for about 3 sec or more to put in a new ink cartridge.

- When Ôno paperÕ is displayed while printing, place paper, and it is automatically fed.
- After you finish printing, press this key to eject paper already fed.
- Press this key to stop fax communication.
- Press this key to stop scanning.

- If you press this key when hook-on and documents will be fed, scanned and stored in

memory.

- If you press this key when hook-on but there is no document, LED meaning ÔFeed documentÕ

will blink for about 3 sec. (Refer to LED status.)

- If you press this key when hook-off, it will operate to receive or transmit the document you

fed.

LED status

System Standby Mode. You can start new operation only in this mode. (TEL mode)
System Standby Mode. You can start new operation only in this mode. (FAX mode)
Data is being received from host.(Printing) other operation
Data is being uploaded to host. (Scanning) Fax transmitting/reception. (Faxing)
Transmitting/receiving error
Paper jam, no paper
No document, next document, document jam
Cartridge is being exchanged. No cartridge
Ink low

● ➞

green LED ON

➞

OFF

➞

green LED blinks

■ ➞

red LED ON

➞

red LED blinks

Ready Busy Scan/Fax

●
●
●
●
●
●
●

●

●
●

●

●

■
■

Ready

Cartridge FF/Stop Start/Copy

Busy Scan/Fax

Ready

Cartridge

FF/Stop

Start/Copy

«
...
53
54
55
56
57
...
»

Summary of Contents for SF-4300C






























































































Reviews:

No comments

Related manuals for SF-4300C

Brand: Janome Pages: 2

Brand: Janome Pages: 31

Brand: Singer Pages: 12

ELEVATE Command UK30200COM

Brand: Oreck Pages: 8

Brand: RS Pages: 2

Brand: JUKI Pages: 247

Lavina 25L HV Pro

Brand: Superabrasive Pages: 29

Brand: Renown Pages: 14

Brand: Golden wheel Pages: 14

Brand: A-S-S Pages: 7

Brand: U.S. Products Pages: 80

Brand: General Pages: 29

Brand: Singer Pages: 25

LT5-H7600-D-N Series

Brand: Unicorn Pages: 55

Brand: Garden Gear Pages: 16

796.3155 series

Brand: Kenmore Pages: 34

Brand: BETCO Pages: 13

Brand: Advance acoustic Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands