background image

T

HE  

F

AX  

M

ACHINE

3

.8

C

HAPTER   

T

HREE  :   

T

HE   

F

AX   

M

ACHINE

3

1

Press ANSWER.

The button lights up
when ANS/FAX mode is
selected. 

3

6

9

DEF

MNO

WXYZ

SPEED

RCV.

ANSWER

VOLUME/

DIRECTION

STOP

START/

 COPY

R

REDIAL/PAUSE

2

When you get a call, the
machine answers the call
with the ANS/FAX
greeting message.

3

The caller can leave a
message. The machine
records the callerÕs
message.

If a fax is being sent, the
machine goes into receive
mode.

Receiving in ANS/FAX Mode

Ã

To turn off ANS/FAX mode, press

ANSWER. The button light will be off.

For more information about ANS/FAX
mode, see page 2.13.

Ã

Anytime while the greeting

message is playing or the incoming
message is being recorded, you can talk
to the other person by picking up the
handset.

If the memory becomes full while a
caller leaves message, your machine
sounds warning beeps and disconnects
the line. The machine will not function
as an answering machine unless you
erase the recorded messages.

If a Call Transfer feature turns on and a
new message is recorded, the machine
will dial the specified phone number
and alert you there is a message
recorded in memory. For more
information on the Call Transfer
feature, see page 4.6.

Ã

If you havenÕt yet recorded a

greeting message, the LCD displays an
error message and you wonÕt be able to
place the machine in ANS/FAX mode
until you record one.

The LCD briefly displays
when the greeting
message was recorded.

Then the LCD counts
down the time as the
message is played back.

TIME:15-06 10:30

ANSWER OGM : 13s

EURO(M)-Chapter 3  3/26/98 3:25 PM  Page 9

Summary of Contents for SF 110T



























































































Reviews: