Samsung Series 5+ 550 User Manual Download

Page: 166 / 246

◀

▶

English

◀

By USB

To upgrade by USB, follow these steps:

Visit www.samsung.com.

Download the latest USB software upgrade

exe archive to your computer.

Extracts the exe archive to your computer.

You should have a single folder with the same
name as the exe file.

Copy the folder to a USB flash drive.

Turn on the TV, and then insert the USB flash drive into the USB port of the TV.

In the TV’s menu, go to

Support

→

Software Upgrade

Select

By USB

Please be careful not to remove the USB drive until the upgrade is complete.

●

The displayed image may differ depending on the
model.

USB

Summary of Contents for Series 5+ 550























































































































































































































































Search results

Summary of Contents for Series 5+ 550

Reviews:

Related manuals for Series 5+ 550

Brands by name

Popular brands

Samsung Series 5+ 550, User Manual

Search results

Summary of Contents for Series 5+ 550

Reviews:

Related manuals for Series 5+ 550

Brands by name

Popular brands