Samsung Sens NT-R410 Series, Service Manual

Page: 23 / 211

2 - 21
Advanced
‰
Core Multi-Processing
The option to determine whether to switch Single core or Dual Core processing.
‰
Intel(R) SpeedStep(TM)
The option to enable or disable the SpeedStep function that automatically changes the CPU clock
speed according to CPU usage. Enabling this function extends the battery use time.
‰
Touch Pad Mouse
The option to enable or disable the touch pad function. If the touch pad function is disabled using
this option, the disabled status will be retained at the next boot time. For your information, if the
touch pad function is disabled by pressing Fn+F9, the touch pad function is enabled at the next boot
time.
‰
Legacy USB Support
The option to determine whether to support a Legacy USB device. If this option is set to Enabled,
you can boot from a USB device.
‰
Large Disk Access Mode
Currently, [DOS] should be set in Torino2. Setting this option is rarely needed.
‰
EDB (Execute Disable Bit)
If [enable], Intel Execute Enable Bit(function) will be enabled.
‰
Internal LAN
The option to determine whether to use a cable LAN device of the system.
‰
Purchased Date
Displays the date when a user boots the PC for the 10th time.
Exit Boot Security Advanced Main
F9 Setup Defaults
F10 Save and Exit
F5/F6 Change Values
Enter Select
?
Sub-Menu
ÏÐ
Select Item
ÍÎ
Select Menu
F1 Help
ESC Exit
Item Specific Help
Intel
®
SpeedStep
™
[Enabled]
Touch Pad Mouse [Enabled]
Legacy USB Support [Enabled]
Internal LAN [Enabled]
Purchased Date 2005/10
Determines whether
the 2
nd core is
enabled.
Disabled = 2
nd
core is
disabled.
Enabled = 2
nd
core is
enabled.
EDB (Execute Disable Bit) [Disabled]
Core Multi-Processing : [Enabled]
Large Disk Access Mode [DOS]
- This Document can not be used without Samsung's authorization -
2. Introduction and Specification