186
Before Using the Recording and Timeshift Functions
Before Using the Recording and Schedule Recording Functions
●
Recording is not supported in the U.S.A and Canada.
●
To set up a Schedule Recording, you must first set the TV's clock. Set the Clock (
System
>
Time
>
Clock
).
●
Recordings are DRM-protected and therefore cannot be played back on a computer or on a
different TV. In addition, these files cannot be played back on your TV if its video circuit has
been replaced.
●
A USB hard drive with a speed of 5,400rpm or above is recommended. However, RAID-type USB
hard drives are not supported.
●
USB memory sticks are not supported.
●
The total recording capacity may vary depending on the amount of available hard drive space
and the recording quality level.
●
Schedule
Recording requires at least 100MB of free space on the USB storage device. Recording
will stop if the available storage space falls below 50MB while recording is in progress.
●
If the available storage space falls below 500MB while both the Schedule Recording and Timeshift
functions are in progress, only the recording will stop.
●
The maximum recording time is 360 minutes.
●
A video is played according to the TV settings.
●
If the input signal is changed while recording is in progress, the screen will go blank until the
change is made. In this case, recording will resume, but
will not be available.
●
Device Performance Test
must be performed on the USB storage device connected to the TV
before a recording can be made. To perform the
Device Performance Test
, select
USB Drive
in
the
MULTIMEDIA
panel and then select the recording device. When you make a recording on the
Guide
or Program Info screen, if the USB storage device has failed in the
Device Performance
Test
, the
Format Device
and
Device Performance Test
are performed again.
●
When using the Record or Schedule Recording function, the actual recording may start a second
or two later than the specified time.
●
If the Schedule Recording function is operating while a recording is being made on an HDMI-CEC
external device, the priority is given to the Schedule Recording.
●
Connecting a recording device to the TV automatically deletes abnormally saved recording files.
●
If the
Off Timer
or
Auto Power Off
has been set, the TV will overide these settings, continue to
record, and turn off after the recording has ended.
Appendix
