Samsung SDP-950STA, Reference Manual

Page: 5 / 12

RS232C Command Code
5
Focus Far
0 x 25
0 x 00 0 x 05 0 x 00
0 x 25
"ACK data" 0 x 05 0 x 00
Focus Near 0 x 00 0 x 0A 0 x 00 "ACK data" 0 x 0A 0 x 00
Zoom Tele
0 x 26
0 x 00 0 x 05 0 x 00
0 x 26
"ACK data" 0 x 05 0 x 00
Zoom Wide 0 x 00 0 x 0A 0 x 00 "ACK data" 0 x 0A 0 x 00
Iris Target 0 x 41 0 x 00 0 x 00 "data" 0 x 41 "ACK data" 0 x 00 "data" Range: "1~120"
Red Target 0 x 43 0 x 00 0 x 00 "data" 0 x 43 "ACK data" 0 x 00 "data" Range: "1~200"
Blue Target 0 x 44 0 x 00 0 x 00 "data" 0 x 44 "ACK data" 0 x 00 "data" Range: "1~200"
Focus Target 0 x 45 0 x 00 "MSB data" "LSB data" 0 x 45 "ACK data" "MSB data" "LSB data"
(1)
Range: "0~2225"
Zoom Target 0 x 46 0 x 00 "MSB data" "LSB data" 0 x 46 "ACK data" "MSB data" "LSB data" Range: "0~1812"
Focus/Zoom
0 x 47
0 x 05 "zoom MSB" "zoom LSB"
0 x 47
"ACK data" "zoom MSB" "zoom LSB"
(1)
Focus: "0~2225"
concurrent Target 0 x 0A "focus MSB" "focus LSB" "ACK data" "focus MSB" "focus LSB" Zoom: "0~1812"
(2)
Drive Stop 0 x 2F 0 x 00 0 x 05 0 x 00 0 x 2D "ACK data" 0 x 05 0 x 00
1st 2nd 3rd 4th
PC Transmit Data to MICOM
Command Remark
PC Receive Data from MICOM
1st 2nd 3rd 4th
[Note 1] Depending of the zoom amount, the range of focus data will be changed. You can figure it out to see
page 4. ("Focus-Status[Max]", "Focus-Status[Min]")
[Note 2] Above 10 Command (Iris up/down ,Red up/down, Blue up/down, Focus far/near, Zoom tele/wide) will
go to all the way once you execute it.
"Drive Stop" can stop those command in certain point that you want.