Samsung SDH-B74041, User Manual

Page: 40 / 88

40
3.2.3 Device
1. HDD
Go to “Main Menu” → “Device” → “HDD” to enter into the interface.
Note: Recording can only be performed when the
HDD is in “Normal” state.
When HDD is connected, the system will automatically detect if the HDD is normal or not; if the
HDD needs to be formatted, select the HDD and format it. If the system detects the HDD is
normal, the HDD status will be shown as “Normal”.

No.: Number of HDD connected to system.

Status: It shows the current status of the HDD. It will be available only when the HDD is
“Normal”.

Free/Total Space: Remaining or total space of the HDD

Free Time: Remaining time for the HDD recording according to current setting for
“Resolution”, “Encoding Rate” and “Frame Rate” of image.

Auto-overwrite: When set to ENABLE and the hard drive is full, the DVR will overwrite the
oldest files on the hard drive. When set to DISABLE and the hard drive is full, the DVR will
stop recording.

Format HDD: Format HDD for the first use.