background image

English

 

_67

 MAIN MENU

• 

Setting Router’s Port Forwarding

1. 

Set the protocol to <

TCP

>.

2. 

External Port Range : Enter the TCP Port set in the  

<

Device Port

> in <

Port

> menu of the connected DVR. 

If more than one DVRs are connected to the router, the 

TCP port can be different.

3. 

Internal PC IP Address : Enter the IP address set to the 

<

IP Address

> in <

Interface

> menu of the connected 

DVR.

4. 

Internal Port Range : Set the same to the “

External Port 

Range

”.

 

M

 

 

Above steps may differ from the router devices depending on the manufacturer. 

Port forwarding is required when you want to access the DVR connected to the router from outside of the router’s 

network.

DDNS

You can set the DDNS site for a remote user’s network connection.

Using the mouse may help make setup easier.

1. 

Use the up/down buttons (

) in <

Network

> window to 

move to <

DDNS

>, and press [

ENTER

] button. 

DDNS Setup screen appears.

2. 

Use the virtual keyboard to enter the <

Product ID

>.

 

Refer to “

Using Virtual Keyboard

”. (Page 36)

 

If selected <

OFF

> input fields are deactivated.

 

If selected <

iPOLiS

>, the server name field is disabled.

• 

DDNS Site : Set whether to use DDNS or not, and select 

the DDNS site if enabled.

• 

Server Name : Enter the server name of the selected DDNS site.

• 

Product ID : Enter the product ID which was registered to the DDNS site.

• 

Quick Connect : Appears if the <

DDNS Site

> is set to <

iPOLiS

>. 

To use this feature, connect the DVR to a UPnP router and set to <

Use

>.

 

M

 

If the quick connect setup has been cancelled while progressing, it is automatically set to <

Not Used

>.

3. 

When the DDNS setup is done, press <

OK

>.

 

OK 

Cancel

DDNS

 DDNS Site 

iPOLiS

 Server Name 

www.samsungipolis.com

 Product ID 

 Quick Connect 

Not Used 

Use

 DDNS Host Address 

http://www.samsungipolis.com/

Connection Mode

Port

Interface

 Protocol Type 

TCP

 Device Port 

4520 

4524

 UDP Port 

8000 ~ 8160

 Unicast/Multicast 

UDP-Unicast

 Multicast IP Address 

224.126.63.1

 Multicast TTL 

5

 HTTP Port 

80

 Secure Video Transmission           ON                  OFF

* Multi Browser Support: 
Device Port 4505~4530, HTTP Port 80

 

OK 

Cancel

Summary of Contents for SDH-B73020




















































































































































Reviews: