installing your dryer
_17
8.
Fasten the 16 screws in the correct positions.
9.
Note that two of the screws have a different length from the others.
(Use the longer screws for the door-lever.)
10.
Move the position of the screw at the back of the door-hinge.
11.
Fasten the screw in the bottom hole.
12.
Remove the two screws holding the front-frame at the left.
13.
Remove the two screws holding the holder-lever at the left.
14.
Now, move to the right side of the product and fasten the two screws
holding the front-frame and the two screws holding the lever-holder.
15.
Align the door with the fixing holes.
16.
Fasten the two screws holding the door-hinge.
You can restore the direction the door opens by following the procedures above, if necessary.
01 INST
ALLING YOUR DR
YER
Holer-Lever
Inside the drum
SDC18809-02805C-05_EN.indd Sec3:17
SDC18809-02805C-05_EN.indd Sec3:17
2013-03-29
11:00:46
2013-03-29
11:00:46