Samsung SDC-415 Series Instruction Manual Download Page 1

Page: 1 / 21

SAMSUNG CCD CAMERA

SDC-415 SERIES

HIGH RESOLUTION
COLOR CCD CAMERA

INSTRUCTION MANUAL

Please read this manual carefully before installing and using the product.

P/No. : Z6806-0660-01A

www.samsungtechwin.co.kr
www.samsungcctv.co.kr

•

SAMSUNG TECHWIN CO., LTD.

Optics & Digital Imaging Division 145-3, Sangdaewon 1-Dong,
Jungwon-Gu, Sungnam, Gyeonggi-do, Korea 462-703
TEL: 82-31-740-8137~41 FAX: 82-31-740-8145

•

SAMSUNG OPTO-ELECTRONICS UK LTD (SOUK)

Samsung House, 1000 Hillswood Drive Hillswood Business
Park Chertsey Surrey KT16 OPS
TEL: 44-(0)1932-45-5308 FAX: 44-(0)1932-45-5325

•

SAMSUNG OPTO-ELECTRONICS AMERICA, INC. (SOA)

Closed Circuit Division 40 Seaview Drive, Secaucus NJ 07094,
U.S.A
TEL : (201) 902-0347 FAX: (201) 902-0429

•

TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD (TSOE)

7 Pingchang Rd, Nankai Dist, Tianjin, P.R China
Post Code : 300190
TEL : 86-22-2761-9698 FAX: 86-22-2761-6514

SALES NETWORK

Summary of Contents for SDC-415 Series






















Search results

Summary of Contents for SDC-415 Series

Reviews:

Related manuals for SDC-415 Series

Brands by name

Popular brands

Samsung SDC-415 Series, Instruction Manual

Search results

Summary of Contents for SDC-415 Series

Reviews:

Related manuals for SDC-415 Series

Brands by name

Popular brands