Alignment & Troubleshooting
Service Manual
4-14
Samsung Electronics
Flash Upgrade
7KH)LUPZDUH8SJUDGHIXQFWLRQDQGKDVWZRPHWKRGV/RFDODQG5HPRWH
1) Local Machine Upgrade
5&35HPRWH&RQWURO3DQHOPRGH
This method is for USB Port Connect to PC and activate RCP(Remote Control Panel) to upgrade the
Firmware.
< Method >
+RZWR8SGDWH)LUPZDUHXVLQJ5&3
1. Connect PC and Printer with USB Cable.
2. Execute RCP and select Firmware Update.
6HDUFK)LUPZDUH¿OHWRXSGDWHZLWK%URZVH,FRQ
&OLFN8SGDWHLFRQ¿UPZDUH¿OHLVWUDQVPLWWHGWR3ULQWHUDXWRPDWLFDOO\DQGSULQWHULVLQLWLDOL]HGZKHQLW
¿QLVKHG
5. Click Refresh icon and check what is updated.
'26&RPPDQGPRGH
This method is just for USB Port. Connect to PC with USB cable and enter DOS Command to upgrade
the Firmware
< Method >
7KH¿UVWRIDOOQHHGWKH¿OHVGRZQEDWGRZQBFRPELQISUWH[HDQG5RP)LOH¿OHQDPHIRUXSJUDGH
6DYHWKH¿OHVLQWKHVDPHIROGHU
2. In the DOS, input as below and push the enter key. Then, it will be automatically upgraded.
3. There are two commands for the conditions of product.
:KHQWKHSURGXFWLVLQLGOHFRQGLWLRQGRZQ³URP¿OH´
:KHQWKHSURGXFWLVLQ5HDG\FRQGLWLRQ7(&+02'('$7$6(783)/$6+83*5$'(/2&$/FRS\E
³URP¿OH´OSW
4. Do not turn off the power while upgrading process.
2) Remote Upgrade
7KLVLVDIXQFWLRQWKDWDID[ZLWKWKHODWHVW¿UPZDUHVHQGV¿OHVWRDID[LQORQJGLVWDQFHWKURXJKWHOHSKRQH
line.
< Method >
%HIRUHUHPRWHXSJUDGHWKHODWHVW¿UPZDUHVKRXOGEHORDGHGLQWRWKHPDFKLQH
7(&+02'('$7$6(783)/$6+83*5$'(5(027(
2. Input the fax number, which needs to be upgraded. (Several faxes can be upgraded at the same time. In
this case, enter the each fax number.)
$IWHUSXVKWKHHQWHUEXWWRQVHQGWKH¿UPZDUH¿OHE\FDOOLQJWRWKHDSSRLQWHGQXPEHU$URXQGa
PLQXWHVQHHGVWRVHQGWKH¿OH
< Caution >
1. sending and receiving fax must be the same model.
2. A sending fax must be set up as ECM mode, and a receiving memory must be set up as 100%. If not, the
function operates abnormally
