Samsung SCX-4321 Service Manual Download Page 91

Page: 91 / 173

Samsung Electronics

Service Manual

Troubleshooting

6-10

6.3.7 No error message when the cover is open

• Description

The Cover Open message does not appears on the LCD even when the print cover is open.

Check and Cause

Solution

1. The ‘Open Cover’ microswitch may be stuck or faulty

2. Check the connector and cables between HVPS and

main PBA.

1. Use TECH mode(“cover sensor test”) to check

cover switch operation. Check and replace switch if
necessary.

2. Replace the Main Control board or HVPS S/W as

necessary.

6.3.6 Cover Open

• Description

The Cover Open message appears on the LCD even when the print cover is closed.

Check and Cause

Solution

1. The ‘Open Cover’ microswitch may be stuck or faulty

2. The tab on the front cover may be damaged or broken

3. Check the connector and cables between HVPS and

main PBA.

1. Use TECH mode(“cover sensor test”) to check

cover switch operation. Check and replace switch if
necessary.

2. Replace the front cover.

3. Replace the Main Control board or HVPS as

necessary.

Summary of Contents for SCX-4321














































































































































































Search results

Summary of Contents for SCX-4321

Reviews:

Related manuals for SCX-4321

Brands by name

Popular brands

Samsung SCX-4321, Service Manual

Search results

Summary of Contents for SCX-4321

Reviews:

Related manuals for SCX-4321

Brands by name

Popular brands