Samsung scx-4100 series User Manual Download

Page: 140 / 169

ROUBLESHOOTING

8.9

Solving Problems

The following chart lists some conditions that may occur and the

recommended solutions. Follow the suggested solutions until

the problem is corrected. If the problem persists, please call for

service.

Paper Feeding Problems

Condition

Suggested solutions

Paper is jammed during

printing.

Clear the paper jam. See page 8.2.

Paper sticks together.

• Ensure that there is not too much paper in the paper tray.

The paper tray can hold up to 250 sheets of paper,

depending on the thickness of your paper.

• Make sure that you are using the correct type of paper. See

“Paper Specifications” on page A.5.

• Remove paper from the paper tray and flex or fan the paper.
• Humid conditions may cause some paper to stick together.

Multiple sheets of paper

do not feed.

• Different types of paper may be stacked in the paper tray.

Load the paper of only one type, size and weight.

• If multiple sheets have caused a paper jam, clear the paper

jam. See page 8.2.

Paper does not feed into

the machine.

• Remove any obstructions inside the machine.
• Paper has not been loaded correctly. Remove paper from the

tray and reload it correctly.

• There is too much paper in the paper tray. Remove excess

paper from the tray.

• The paper is too thick. Use only paper that meets the

specifications required by the machine. See “Paper

Specifications” on page A.5.

The paper keeps

jamming.

• There is too much paper in the paper tray. Remove excess

paper from the tray.

• An incorrect type of paper is being used. Use only paper that

meets the specifications required by the machine. See

“Paper Specifications” on page A.5. If you are printing on

special materials, use the manual feeder.

• There may be debris inside the machine. Open the front

cover and remove the debris.

Transparencies stick

together in the paper

exit.

Use only the transparencies specifically designed for a laser

printer. Remove each transparency as it exits from the

machine.

Envelopes skew or fail

to feed correctly.

Ensure that the paper guides are against both sides of the

envelopes.

Summary of Contents for scx-4100 series










































































































































































Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands

Samsung scx-4100 series, User Manual

Search results

Summary of Contents for scx-4100 series

Reviews:

Related manuals for scx-4100 series

Brands by name

Popular brands