Samsung SCW71 Owner'S Instruction Book Download

Page: 59 / 66

ENGLISH

Troubleshooting

Checking

✤

If you run into any problem using the camcorder, use the following table to troubleshoot the problem.

✤

If these instructions do not allow you to solve the problem, take a note of:

■

The model and serial number marked on the bottom of the camcorder.

■

Your warranty, if applicable.

✤

Then contact your nearest authorized service center.

Symptom

Explanation/Solution

You cannot switch the

◆

Check the battery pack (see page 22)

camcorder on.

or the AC power adapter. (see page 21)

Start/Stop does not

◆

Check the power set it to CAMERA.

operate while recording

◆

You have reached the end of the cassette.

◆

Check the record protection tab on the cassette. (see page 25)

The camcorder goes

◆

You have left the camcorder set to STANDBY

off automatically.

for more than 5 minutes without using it.(see page 27)

◆

The battery pack is fully used up. (see page 24)

The battery pack is

◆

The atmospheric temperature is too low. (see page 24)

quickly exhausted.

◆

The battery pack has not been charged fully.(see page 22)

◆

The battery pack is completely dead, and cannot be recharged.
Use another battery pack.

You cannot eject the cassette

◆

The battery pack is fully used up.

from the compartment.

◆

A mechanical fault might have occurred. (see page 58)

The DATE/TIME indicator flashes

◆

The lithium battery is not installed or is fully used up.(see page 20)

more than 2 times when you
set the camcorder to CAMERA.

The playback picture is poor.

◆

The video heads might be dirty. (see page 56)

You cannot operate

◆

A mechanical fault might have occurred (see page 58).

any functions on the camcorder.

Summary of Contents for SCW71



































































Search results

Summary of Contents for SCW71

Reviews:

Related manuals for SCW71

Brands by name

Popular brands

Samsung SCW71, Owner'S Instruction Book

Search results

Summary of Contents for SCW71

Reviews:

Related manuals for SCW71

Brands by name

Popular brands