background image

English 

_45

  

SETUP

CLOCK SET

Sets whether to display the clock on the screen and its time format.

For selecting and saving each menu item, refer to “

How to use the keyboard controller

”. (page 20)

Select <

MAIN MENU

>-<

CLOCK SET

>.

Select <

DISPLAY

> and set whether to 

display the time on the screen.

Select the time format and set the clock.

Select the date format and set the date.

OTHER SET

You can reset the system by running FACTORY DEFAULTS, or set the font color, zoom, 
turbo pan/tilt, etc.

For selecting and saving each menu item, refer to “

How to use the keyboard controller

”. (page 20)

Select <

MAIN MENU

>-<

OTHER SET

>.

Select each item and set appropriately.

1.

2.

3.

4.

1.

2.

W

  CLOCK SET  

X

DISPLAY 

OFF 

DISPLAY OFF 
TIME FORMAT 

12HOUR 

TIME FORMAT 

12HOUR 

SET TIME 

AM 07:34:48 

SET TIME 

AM 07:34:48 

DATE FORMAT 

MM/DD/YYYY 

DATE FORMAT 

MM/DD/YYYY 

SET DATE 

01/01/2009 

SET DATE 

01/01/2009 

W

  OTHER SET  

X

LANGUAGE 

ENGLISH

LANGUAGE ENGLISH
FACTORY DEFAULTS 

FACTORY DEFAULTS 
OSD COLOR 

BW

OSD COLOR 

BW

PROPORTIONAL P/T 

ON

PROPORTIONAL P/T 

ON

P/T SPEED 

P/T SPEED 

[[22] 

AUTO CAL. 

OFF

AUTO CAL. 

OFF

D-FLIP 

OFF

D-FLIP OFF
PASSWORD 

OFF

PASSWORD OFF

Z6806125101A-SCP-2430(P)-ENGLISH45   45

Z6806125101A-SCP-2430(P)-ENGLISH45   45

2010-05-04   오후 2:46:39

2010-05-04   오후 2:46:

Summary of Contents for SCP-2430























































Reviews: