Samsung SCO-2081R Series, User Manual

Page: 21 / 36

English_21
●
SETUP
WHITE BAL (WHITE BALANCE)
Use the White Balance function to adjust the screen color.
※
INDOOR : Select this when the color temperature is between 4,500°K and 8,500°K.
MANUAL : Select this to fi ne-tune White
Balance manually. Set White
Balance fi rst by using the ATW
or AWC mode. After that switch
to MANUAL mode, fi ne-tune the
White Balance and then press
the Function Setup switch.
AWC
→
SET : To fi nd the optimal luminance level for the current environment,
point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
1.
2.
y
y
y
WB MANUAL
䯝
RED GAIN
Press SET to Return
BLUE GAIN
When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function
Setup switch so that the arrow indicates ‘White Bal’.
Select a desired mode using the Function Setup switch.
Select one of the following 5 modes, as appropriate for your purpose.
IIIIII
*
IIIIIIIIIIIIIIIIIIII
117
IIIIIIIIIIIIIIIII
*
IIIIIIIIII
193

White Balance may not work properly under the following conditions.In this case select the AWC
mode.
1
When the color temperature of the environment surrounding the subject is out of
the control range (e.g. clear sky or sunset).
2
When the ambient illumination of the subject is dim.
➌
If the camera is directed towards a fluorescent light or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
same time, even when the subject is backlight, by adopting
W6 DSP chip.
BACKLIGHT
The SCO-2081R is designed to deliver a distinctive subject and background at the
a function of the proprietary
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the
Function Setup switch so that the arrow indicates BACKLIGHT .
ATW : Select this when the color temperature is between 1,800°K and 10,500°K.
OUTDOOR : Select this when the color temperature is between 1,800°K and
y
y
10,500°K.(sodium light inclusion)